813 Fab "4xAIR" - Air Coupler Insert kit for Jeep 4xe Cowl Panel

The "4xAIR" kit was designed as a simple DIY kit for setting up your onboard air coupler and rocker switch using the 4xe cowl panel. The insert is 3D printed using carbon infused filament. All that is required is to cut out the rubber area of the 4xe charge port housing and drill the two lower holes to match the two holes in the insert. This kit is designed for the customer to set up their air system with ease and works great with our under hood compressor mounts, especially the 813 UnderHood ARB Single Compressor Mount. Our insert will also work with other aftermarket air systems.

Included with the kit: 3D printed insert, 3D printed "AIR" tag for front of cowl side trim panel, ARB JIC-4 air coupler, ARB 90° elbow fitting and stainless mounting screws. 

The 4xe Cowl Parts needed are:

Cowl Side Trim Panel, Left - Mopar (6SS58TZZAC)

Charge Port Housing - Mopar (68467793AD)

The 4xe cowl housing and side trim panel are NOT included with this kit and sold separately. We do offer air lines separately to set up your air system with the 4xe cowl panel.  These kits are "print-to-order" and will take approx 1-4 days to ship once you place your order. The 4xe cowl panels work on both Jeep JL and Jeep Gladiator. The cowl panels DO NOT WORK with the 392 or Mojave models. 

Installation Instructions